Traditional  solutions for antenna switching and control have required a lot of custom cabling with multi-conductor cables and possibly a complex diode matrix for antenna selection. While this method may work, it is tedious and difficult to change station configurations.

   With ShackLAN-4, all antenna switches, controllers, bandpass filters, etc. are connected together with a single 4-wire cable. This greatly lowers wiring complexity and costs. It  also allows every operating position to have access to all antennas, stack controls, etc.

   The ShackLAN-4 system is modular, completely configurable and designed to grow with your station. It is suitable for the small station with only a handful of antennas to the largest contest stations with dozens of antennas. The configuration possibilities are almost endless. Do you have a multiple radio setup and occasionally like to set up a separate operating position for a multi-two contest effort? With ShackLAN-4, all you need to provide for the second station is a 4-wire cable and a feedline to give the temporary station full access to antennas, filters, stack controls, etc. ShackLAN-4 is also ideal for the ham who has a main station in one room of the house and a casual operating position in a different location, such as a den or family room.

   Ever had an antenna fail during a contest? Most of us had, at one time or another. With ShackLAN-4, it takes only seconds to remap your antenna assignments. All ShackLAN-4 products feature a simple configuration process using intuitive GUI software. Click the links at the left for details on each unit.

   With ShackLAN-4, you do not need to boot up your computer just to run your station. All ShackLAN-4 products can operate independently of your computer.

Documentation for all products

Email support@hamation.com for more information