|
|
|
|
Basic driver $249 |
||
|
Terminal board + 6ft cable $99 |
||
|
|
Driver + terminal board + 6ft cable $319 | |
|
DIN rail version $249 |
||
| Our RD-16 Relay Driver provides a solution to automate your existing remote antenna switches, such as SixPaks, StackMatch, 4-squares, etc to our ShackLAN-4 control system. It provides 16 separate outputs that can source +12 VDC at up to 150 ma each. You may have different relay configurations for multiple radios and up to 8 antennas per band. It may also be used to automate RX antenna switching, such as beverages or K9AY loop systems. Each antenna may use any combination of outputs. The unit is fused for protection against reverse polarity power and short circuits on the outputs. Each driver IC is socketed for easy replacement should the need arise. The Relay Drivers are available in two packaging options. Pictured above is the desktop model. We also offer a DIN rail mountable termination board for the desktop unit that greatly simplifies connecting your cables and provides MOV protection on each output. MOV protection is included in the DIN rail version. | ||
| Pictured at left is an optional DIN rail mountable circuit board for mounting in weatherproof boxes at the tower base. | 
|
|
| Here is a photo of the remote Relay Driver unit with DIN rail mounting brackets. It is designed to be installed in an existing box along with the equipment to be controlled. |
 |
|
